The rigid and versatile SMG F1000 Pneumatic Flange Facing Machine delivers high-torque performance to quickly re-face flanges and repair sealing and bearing surfaces efficiently and cost- effectively
$ 24,408.22 USD
The rigid and versatile SMG F1000 Pneumatic Flange Facing Machine delivers high-torque performance to quickly re-face flanges and repair sealing and bearing surfaces efficiently and cost- effectively
| Facing Feed Rates | (3 off In/Out) | ||||
| Direction | Gear | inches/rev | mm/rev | Grooves per inches |
Grooves per mm
|
| Out | 1 | 0.005 | 0.139 | 183 | 720 |
| 2 | 0.009 | 0.217 | 117 | 460 | |
| 3 | 0.021 | 0.528 | 48 | 190 | |
| In | 1 | 0.006 | 0.165 | 154 | 610 |
| 2 | 0.01 | 0.258 | 98 | 390 | |
| 3 | 0.025 | 0.628 | 40 | 160 | |
| inches/rev | mm/rev | ||||
| Boring Feed Rates (3 off Up/Down) | 0.002 – 0.004 – 0.008” | 0.05 – 0.10 – 0.20 mm | |||
| Imperial | Metric | |
| Facing Diameter: | ||
| Min Facing Diameter | 6 inches | 150 mm |
| Max Facing Diameter | 40 inches | 1000 mm |
| ID Mounting Diameter | ||
| Min I.D. Mount | 5.7 inches | 145 mm |
| Max I.D. Mount | 32 inches | 813 mm |
| Minimum Swing Diameter | 32 inches | 813 mm |
| Stroke | ||
| Tool Post Travel – (geared automatic) | 4 inches | 102 mm |
| R.P.M | Min:0 | Max:33 |
| Drive – Pneumatic @ 90 P.S.I (6 bar)
Servo motor system |
1.7 KW
1.5 KW |
2.2 HP
2.0 HP |
| Air Consumption / Supply Required | 64 S.C.F.M | 1.79 m³/min |
| Approximately Operational Weight | 385 lbs | 175 kg |
| Approximately Shipping Weight | 440lbs | 200 kg |
| Approximately Shipping Dimensions
Length x Width x Height |
32 x 21 x 20 inches |
820 x 530 x 500mm
|
| Weight | 200 kg |
|---|---|
| Dimensions | 82 × 53 × 50 cm |
Only logged in customers who have purchased this product may leave a review.
SMG F350 Portable Flange Facing Machine is manually operated and is a very using onsite tool designed for refacing of flat face flanges of various materials, providing a gramophone finish thus to create optimum gasket contact and gasket seating conditions.
The SMG F610 Pneumatic Flange Facing Machine (Facing Range: 2 – 24” (50 – 610mm) is an overall cost effective technique which allows you to face, bevel, and turn pipe, value and pump flange with ease . Which in turn helps to keep your plant running efficiently, safely and more environmentally friendly. It gives machine shop accuracy , combined with ease of handing and portability in the flange range .Spur gears engage directly on the drive ring, keep power requirements and losses to a minimum and allowing maximum torque at the cutting tool . When the machine is used in the vertical plane , balancing is greatly reduced. F610 can be used in horizontally, vertically or overhead planes.
The rigid and versatile SMG F1000H Hydraulic Flange Facing Machine delivers high-torque performance to quickly re-face flanges and repair sealing and bearing surfaces efficiently and cost- effectively
SMG RGAR916 Adaptor 
10 x SMG Stainless Steel Beveling Tool Bits For OCE/OCP Models 
There are no reviews yet.